Multimeter Features and Specs

V79 DMM is a True RMS digital multimeter as well as a thermometer. This is an auto raging meter that will give reading when you plug it in at any times. This is a 3 3/4 digits meter that reads 3999, this gives you much higher accuracy than a meter with a reading at 1999 only. The back light on the LCD gives you convenience in a dark, and auto power off saves the battery in a long run. It comes with a pair of test leads and a set of thermocouples, it works on a 9 V battery, a test battery is included. You can use it to measure AC/DC voltage and current, resistance, capacitance, frequency and temperature both in Fahrenheit and Celsius.

Click the picture on the right to access the manufacuturer's webpage.

If your DMM worked before but not any more, you can check its fuse or battery. See the linked document below for fuse replacement. V79 Fuse Replacement Guide

  DCV: (Range) 0-400mV-4V-40V-400V-(+-0.5%)-1kV(+-1.0%)

  ACV: (Range) 0--400mV(+-1.5%)-4V-40V-400V(+-0.8%)-750V(+-1.5%)

  DCA: 0-400uA-4000uA-40mA(+-1.2%)-10A(+-2.0%)

  ACA(True RMS): 0-400uA-4000uA-40mA-400mA(+-1.5%)-10A(+-2.0%)

  Resistance: 0-400-4k-40k-400k-4M(+-0.8%)-40M(+-1.2%)ohm

  CAP: 0-20nF-100nF-10uF-100uF(+-3.5%)1mF/10mF/100mF (+-5.0%)

  Frequency: 0-100Hz-1000Hz-10KHz-1MHz-30MHz(+-0.5%)

  Temperature: C: -40 degree C - 1000 degree C

  Transistor and Diode test Audible continuity:< 70 ohm

  True RMS 3 /34 Digits High Accuracy Multimeter with Capacitance and Frequency and Tempterature

  Back Light for Use in Dark, With a pair of High Quality Test Leads. It checks Transistor hFE

  Temperature Measurement with F or C with a pair of Probe Included

  Data Hold and Relative Measurement, Auto Power Off for Power Saving